How do I allow a program to not access the Internet?

Download Article

Table of Contents Show

About This Article
Is this article up to date?
How do I change internet permissions for a program?
How do I allow a program to not use the internet Windows 10?
How do I block a program from accessing?
How do I get permission to remove internet from an app?

Download Article

You may want to block a program—or several—from accessing the Internet. You may want to block someone's entire computer from accessing the Internet, or you may want to temporarily disable your own access so that you can get work done without being distracted. The easiest way to disable access, regardless of the operating system, is simply to remove the network interface hardware from the computer, or disconnect the computer's LAN cable or wireless network. Read on, however, for software-based ways to disable access from within the computer's user interface.

1
Go to the Control Panel. Click the "Windows" key or the "Start" icon, then click on "Control Panel".
- If you are using Windows 8, you can move the mouse up to the top right-hand corner of your screen to show the "charm bar," then click on "Control Panel". Alternately, hold down the Windows key while pressing C and click on "Settings".[1]
2
Open the Security Center.
Advertisement
3
Open Windows Firewall settings.
- Open the "Exceptions" tab.
- Un-check the program for which you want to block access to the internet.
- Click "OK" when prompted.
4
Open the program and try to access the Internet. The program that you deselected should no longer be able to permeate the Windows security firewall, meaning that it is effectively blocked from reaching the Internet. You should still be able to access the Internet using all other programs.

1
Go to the Control Panel. Click the "Windows" key or the "Start" icon, then click on "Control Panel".
- If you are using Windows 8, you can move the mouse up to the top right-hand corner of your screen to show the "charm bar," then click on "Control Panel". Alternately, hold down the Windows key while pressing C and click on "Settings".
2
Navigate to the "Network and Sharing Center". Under Network and Internet—if you are viewing by category—click on "Network settings, network adapters", then click on "View network status and tasks". If you are viewing by icons instead of by category, click on "Network and Sharing Center".
3
Left-click to highlight and select the WiFi connection. Now, right-click on the highlighted WiFi connection and click "Disable". This should block the computer from accessing this particular WiFi network, but it will not block any others unless you disable them as well. This setting should not stop any other computers from logging onto the WiFi network.
- This process is reversible. If you want to enable the network connection later, you can do so by right-clicking on the WiFi connection and clicking "Enable".
- You must be logged on as an administrator or a member of the Administrators group in order to complete this process. If your computer is connected to a network, network policy settings may also prevent you from disabling the connection.
4
Disable all network connections. For a more advanced disable on Windows, go to Start>All Programs>Accessories, right-click Command Prompt and select Run as Administrator, grant the prompt if necessary, and type "mmc compmgmt.msc" (without quotes) and press enter. Wait for it to load, then click Device Manager in the left-hand frame. Open the Network Adapters subtree, right-click all devices listed there, and select Disable. Now restart for good measure (this is optional).
- To undo this, simply repeat the process but instead of selecting Disable, select Enable.
5
Consider using parental control software. You can also disable access to the Internet using third-party parental control software. These programs allow you to limit the sites that a computer can access, and they also allow you to completely block a computer from using the Internet. You need to install the software directly to the computer in question. You may need to pay a small user fee, depending on the program, but you will be able to rest assured that your child is not using the Internet in a way that you haven't approved.
- On Apple OS X, you can configure the built-in parental controls to disable access to the internet for certain accounts.

1
Go to Internet Options in the Control Panel.
2
Go to the Connections tab and click LAN settings.
3

Uncheck "Automatically detect settings". Then, check "Use proxy server" and put settings in for a proxy server that doesn't exist. This will time out the Web browser each time a user tries to pull up an Internet site.
4
Understand that this method is not fail-proof. A savvy user could go into the settings and fix this.[2]

1
Consider using an internet-toggling app. These programs may come in handy if you want to temporarily disable your Internet access for an entire computer, but you don't want to navigate the firewall settings each time you do so. Perhaps you want to get some work done offline, but you don't want to completely isolate yourself from the possibility of using the Internet. You can usually choose to disable all sites or just certain sites.
2
Try using the Toggle Internet script. This app will help you “forcefully” step away from the Internet by temporarily disabling all Internet access from your computer. This little script will allow you to completely disable the Internet on your Windows computer with a click. You can restore the Internet connection anytime later with another click. To get started, download Toggle-Internet.bat to your desktop.
3
Toggle your Internet. Right click on the Toggle desktop icon. Choose “Run as Administrator,” and you’ll be instantly disconnected from the Internet. Later, when you need to reconnect, just right-click the same file and run as an administrator as before.
- Internally, the script merely toggles the status of your Network Adapter (also known as the LAN adapter or Ethernet card) thus shutting down the Internet for you. If you were to disable or enable the Network Adapter manually, the steps would be Control Panel -> Network and Internet -> View Network Status -> Change Adapter Settings.
4
Try using Let Me Work. Toggle Internet will temporarily block all sites, but you may wish to disable access to just a select groups of distracting websites while staying connected to Google Docs or your email. Download the Let Me Work script. You can specify the list of sites that should be blocked and this script will modify the Windows HOSTS file to shut them off, temporarily.[3]

Add New Question

Question
Is it possible to block a specific iPhone from accessing the home broadband?

Definitely! It depends on how advanced with technology you are though. If you know what 192.168.0.1 (or 192.168.1.1) is, then you know that you can access settings with your router. Inside there, you can find the device and add the device to the MAC Address blocking list. This will block all access to the internet. They can connect, but it won't let them use it at all. Whether that is available or not depends on your router, but anything fairly new should do the job.
Question
How to prevent other people from accessing my wifi?

Liza Gaylord
Community Answer
The easiest way to do this is have wifi with a password on it so that others will be prompted for a password when they try to use your wifi. Most routers come with security options -- investigate the instructions for your router to accomplish this.
Question
Is there a way to block internet access via an ethernet cable?

You can remove the cover to the outlet on the wall and remove the cord from the plug. If you want a more permanent solution, cut the cord completely.

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Make sure that you want to get rid of your Internet before you do this. Bear in mind, however, that most methods are reversible.
Disabling Internet access means that the program can never connect to the internet, whether to download updates or to send any data. Make sure that you do not need a given program to connect to the Internet.
Always check the Firewall exceptions for unauthorized programs.

Show More Tips

Thanks for submitting a tip for review!

If you have an anti-virus then you must adjust the exceptions from its interface.

About This Article

Article SummaryX

1. Open Control Panel.
2. Click System and Security.
3. Click Windows Firewall.
4. Uncheck the app you want to block.
5. Click OK.

Did this summary help you?

Thanks to all authors for creating a page that has been read 692,736 times.

Is this article up to date?

How do I change internet permissions for a program?

In the Settings window, click Firewall. On the Program Control tab, select the program that you want to allow access to the Internet. In the Access drop-down list for the program entry, click Allow. Click Apply.